Genius KB 600 V2 User Manual

ENGLISH
1
Hardware Installation
1. Install two AA batteries in the mouse and two AAA batteries in the
keyboard.
2. Plug in the USB receiver to a USB port of your PC.
3. Turn on your PC.
Software Installation
You can download the software from www.geniusnet.com. Go to Service &
Support and select “Drivers”. In Product Line, select “Keyboard & Mouse
combination”, then go to “Select Model” and select “KB 600”. Then select the
OS you are using. Click on the file name to start the download. Once you have
downloaded the driver to your PC, click on the file name to start the software
installation. Just follow the instructions shown on the screen to complete the
installation.
Important Notice
1. Default hotkeys operate immediately when using Windows XP or above.
2. When the mouse is in sleep mode (power saving mode), press any button
on the mouse to wake it up.
ID Channel Setting
The channel buttons are factory preset. The green LED, the data transmissions
indicator on the receiver will be lit when the keyboard or mouse is in normal
operation. If the keyboard / mouse do not work then you have to reset the ID
channel setting. Please press the connect button on the receiver first and press
the connect buttons under the mouse and keyboard within 20 seconds.
Keyboard hot key definition
1. Stop: Stop playing the media sources.
2. Media Player: Activate the Media Player feature.
3. Play/Pause: Play /Pause the media sources.
4. Volume Down: Decrease volume.
5. Volume Up: Increase volume.
6. Mail: Open your email feature.

Genius KB 600 V2 Specifications

General

Brand	Genius
Model	KB 600 V2
Category	Keyboard
Language	English

Summary

Hardware Installation

Install Batteries

Install two AA batteries in the mouse and two AAA batteries in the keyboard.

Connect USB Receiver

Plug the USB receiver into a USB port on your PC.

Power On PC

Turn on your PC.

Software Installation

Download Software

Download software from www.geniusnet.com, selecting product and OS.

Install Software

Run the downloaded file and follow on-screen instructions for installation.

Important Notices

Hotkey Operation

Default hotkeys operate immediately on Windows XP and above.

Mouse Sleep Mode

Press any mouse button to wake it from sleep mode.

ID Channel Setting

Channel Setting Procedure

Reset ID channel by pressing connect buttons on receiver and device within 20 seconds.

Keyboard Hotkey Definitions

Stop Media

Stop playing the media sources.

Activate Media Player

Activate the Media Player feature.

Play/Pause Media

Play or pause the media sources.

Volume Control

Decrease or increase the audio volume.

Open Email

Open your email feature.

Internet Hotkey Definitions

Homepage Access

Access your preset homepage through Netscape or IE.

Refresh Internet Page

Refresh the current internet page.

Navigate Internet Pages

Go back or forth between previous and next internet pages.

Activate Calculator

Activate the calculator function.

System Sleep Mode

Turn the system into sleep mode.

Battery Usage Guidelines

Battery Performance Factors

Battery types and temperatures affect performance.

Cold Environment Usage

Avoid extremely cold environments to maintain battery life.

Rechargeable Battery Use

Charge/discharge rechargeable batteries fully for optimal performance.

Normal Warmth

Device may feel warm during extended use; this is normal.

Battery Storage

Remove batteries for extended storage to prevent leakage or corrosion.

Battery Maintenance

Keep terminals clean and never use manganese batteries.

Battery Replacement

Risk of explosion if battery is replaced by an incorrect type. Dispose properly.