General Information
Quality
This exercise product has been designed and
manufactured to comply with the latest (BS EN 957)
British and European Safety Standards.
Questions
Should you encounter any difficulty with the
assembly, operation or use of your exercise product
or if you think that you may have parts missing,
please DO NOT return it to your retailer but contact
us first for help and advice, asking for CUSTOMER
SUPPORT, by any of the following means.
Guarantee
The guarantee's its product
range for DOMESTIC USE ONLY for a period of
1 YEAR from the original certified date of purchase.
During this period we have the right to: -
a). Provide parts for the purchaser to effect repair.
b). Repair the product, returned to our warehouse
(at the purchaser's cost).
c). Replace the product if it is deemed (by us) to
be economical to do so.
This guarantee does not cover wear and tear on
upholstery or consumables.
This guarantee does not cover abuse, defects
caused by storage or use outside those intended.
If you need to advise us of a defect with your product
and in order for us to service any requirement for
replacement parts or repairs, we will ask for proof
of purchase. Failure to do so will result in any claim
for replacement parts or repairs being refused.
This guarantee, (both given and implied) applies
to the original purchaser only, is not transferable
and will be invalidated if used outside of the above
criteria.
This guarantee is valid only in the United Kingdom
and Eire. This does not affect your statutory rights
as a consumer.
Tools
If required, most of our products are supplied with
basic tools, which will enable you to successfully
assemble your product. However, you may find it
beneficial to have a soft-headed hammer and perhaps
an adjustable spanner handy as this may help.
Prepare the Work Area
It is important that you assemble your product in
a clean, clear, uncluttered area. This will enable
you to move around the product while you are
fitting components and will reduce the possibility
of injury during assembly.
Work with a Friend
You may find it quicker, safer and easier to assemble
this product with the help of a friend as some of
the components may be large, heavy or awkward
to handle alone.
Open the Carton.
Carefully open the carton that contains your product,
taking note of the warnings printed on the carton
to ensure that the risk of injury is reduced. Be aware
of sharp staples that may be used to fasten the
flaps as these may cause injury. Be sure to open
the carton the right way up, as this will be the
easiest and safest way to remove all the components.
Unpack the Components
Carefully unpack each component, checking
against the parts list that you have all the necessary
parts to complete the assembly of your product.
Please note that some of the parts may be
pre-fitted to major components, so please check
carefully before contacting our CUSTOMER SUPPORT
team. In any event, please do not return the product
to your retailer before contacting us first.
To Next Page
Loading...