EasyManua.ls Logo

GENMAX GM7250iEDC - Preparations; Fueling and Oil Check

GENMAX GM7250iEDC
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
PREPARATIONS
Fuel
1
DANGER
Fuel is flammable and toxic, please read the Safety Instruction carefully before refueling;
Do not fuel too full, otherwise fuel will spill after fuel tank is warmed;
After refueling, confirm that the fuel tank cap has been tightened.
ATTENTION
After refueling, dry gasoline residue with a clean and soft cloth in time to avoid damaging plastic
enclosure;
Unleaded gasoline must be used, as leaded gasoline can seriously damage internal parts of the
generator;
Remove fuel tank cap, and add gasoline to red horizontal indicating line oil
level.
Fuel tank capacity: 3.6gal
Oil
2
No oil is filled into this generator when being delivered. Do not start up the generator without filling sufficient
oil.
Please place the generator onto a horizontal plane surface;
1.
Loosen the two bolts on the right panel cover
and remove the left panel cover. Unscrew oil
dipstick;
2.
Fill in 0.21gal oil (SAE 10W/30 oil is
recommended, of which the grade is API
standard Type SE or higher);
3.
Don't go over the scale
Oil to the appropriate position, tighten the dipstick, cover the right exterior cover, and tighten the bolts.
4.

Related product manuals