EasyManua.ls Logo

GENMAX GM7250iEDC - Starting Up the Generator

GENMAX GM7250iEDC
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
STARTING UP THE GENERATOR
Press the LOW IDLE switch to "OFF";
4.
Press the main switch to "ON";
5.
Select the Fuel:
a. Gasoline: Turn the fuel source switch to gasoline;
b. LPG:
1. Connect the LPG hose to the LPG tank;
2. Tighten the other end of the LPG hose to the generator intake;
3. Turn the fuel source switch to LPG.
3.
1. 2. 3.
Remove the load from all output ends;
1.
Connect battery line before first use:
1. Loosen the two bolts on the panel cover and remove the left panel cover;
2. Connect the positive and negative electrodes of the battery.
Tip: Connect the same color wires together, do not connect the wrong
positive and negative wires.
2.

Related product manuals