Installing the Wall Mount
The installation kit includes the following hardware:
12 Heavy Duty Wall Anchors (Bolts / Washers / Expanding Nuts)
8 Screws (ATM to Wall Mount)
Tools:
If using the anchors supplied with the kit, you’ll need to drill 12
holes that are 5/8” in diameter to install the expanding anchors.
You’ll need a 1/2” socket / nut driver or wrench to secure the
anchors.
You’ll also need a #2 Phillips head screwdriver
Review the installation document and consider any additional
tools which may be necessary for your specific location or
installation site.
To Next Page
Loading...