Need help?Do you have a question about the Genmega ONYX-W and is the answer not in the manual?
General| Material | Steel |
|---|---|
| Color | Black |
| Dispenser | NMD1000 or Puloon LCDM2000 |
| Cassettes | Up to 4 cassettes |
| Display | 10.1" LCD |
| Card Reader | EMV card reader |
| Printer | Thermal receipt printer |
| Connectivity | TCP/IP |
| Security | UL291 Business Hours, PCI compliant |
| Operating System | Windows CE 6.0 |
Details on how the Onyx-W is mounted using a steel bracket and screws.
Explains cable routing options through the bracket and chassis for power and communication.
Lists the included hardware (anchors, screws) and required tools for installation.
Use the bracket as a template for marking holes, noting elongated holes and the top lip orientation.
Instructions for cutting wall sections for internal cable routing through the mounting bracket.
Steps for lifting and hanging the machine onto the secured wall bracket.
Accessing internal screws to secure the machine and closing components.
Removing a plastic bung from the chassis bottom for cable routing.
To Next Page