Safety Guideline
SainSmart does not accept any responsibility or liability for any use or misuse of the Laser.
1. Beware of the laser
After the laser is turned on, it is forbidden to aim at people, animals and flammable materials to avoid
skin burns and fire.
3. No entry
Keep your hands away from the machine when the machine is working to avoid injury.
2. Do not look directly at the light
The brightness of the laser is harmful to the eyes, please try not to look directly at the laser.
4. Turn off machine when not in use
Turn off the machine switch when the machine is not in use to avoid third-party operations.
Be sure to disconnect the power when cleaning, maintaining or servicing the laser equipment.
DO NOT stare at the bright and intense light appearing during the engraving process. Doing so can cause
serious eye damage.
Never use the laser except for the purpose intended.
Pay attention to
03
To Next Page
Loading...