To Next PageTo Next Page
Need help?Do you have a question about the Gent Vigilon EN54 and is the answer not in the manual?
Introduction to the operating instructions and system overview.
Explanation of symbols, abbreviations, and important notes used in the manual.
Details on the physical components and their roles in the fire alarm system.
Defines the roles and responsibilities for operating and maintaining the fire alarm system.
The central unit of the Vigilon fire detection and alarm system.
Component for central indications in a Vigilon network system.
An overview of the physical controls and visual indicators on the Vigilon panel.
Procedure for performing weekly operational tests on the fire detection system.
Instructions on how to initiate a fire alarm manually using a call point.
Explanation of how the system automatically detects and responds to fire events.
Guidelines for investigating and reducing false alarms in the fire detection system.
Information on system faults, their indications, and initial actions.
Common fault messages, their meanings, and recommended actions for resolution.
Explanation of system disablement states and their implications.
Common disablement messages, their meanings, and recommended actions.
Procedures for routine maintenance tasks on system components.
Steps for replacing the battery in the control panel or related equipment.
Guide to navigating and operating the system menus using the panel controls.
Instructions for changing the user access PIN code for system security.
Procedure for accessing and viewing logged historical events on the system.
Steps to save configuration changes, labels, or passwords to the system's non-volatile memory.
Instructions for setting and adjusting the system's internal clock and date.
Procedure for enabling or disabling specific zones within the fire detection system.
Methods for checking labels assigned to devices or system elements.
Steps to modify or assign labels to individual devices connected to the system.
General| Standard | EN54 |
|---|---|
| Type | Fire Alarm Control Panel |
| Input Voltage | 230V AC |
| Battery Backup | Yes |
| Display | LCD |
| Number of Zones | 2 |
| Communication | Ethernet |
