To Next PageTo Next Page
Need help?Do you have a question about the Gent Nano and is the answer not in the manual?
Provides an overview of the operating instructions for the Nano system.
Lists related documentation for the Nano panel based fire detection system.
Explains document conventions, symbol meanings, and abbreviations used.
Details the responsibilities of the user for the fire alarm system.
Covers daily, weekly, and quarterly maintenance, and false alarm limitations.
Outlines daily inspection procedures for the fire alarm system.
Describes the weekly testing procedures for the fire alarm system.
Specifies quarterly inspection and maintenance tasks for the system.
Provides guidance on investigating and limiting false alarms.
Describes the main control panel, its location, and function.
Explains the purpose and placement of repeat indicator panels.
Details the function of various indicator lights on the control panel.
Explains the function of the control buttons and navigation elements.
Describes how to navigate through the panel menus and options.
Describes the panel indications when the system is operating normally.
Details how to enter the Customer Mode PIN for Level 2 access.
Provides step-by-step instructions for entering the Customer Mode PIN.
Explains the procedure for conducting weekly fire system tests.
Guides users on putting the system into weekly test mode.
Details the steps to exit the weekly test mode.
Explains how to view the log of active test events.
Guides users on accessing and viewing the active test log.
Describes how to manually trigger a fire alarm using a call point.
Covers silencing alarms, resetting the system, and cancelling the buzzer.
Explains how to silence audible alarms after an event.
Details the procedure for resetting the system after a fire event.
Explains how to stop the panel buzzer from sounding.
Explains how the system automatically detects and indicates fire events.
Describes how multiple fire events are displayed and managed.
Explains how to activate the verification delay for alarm investigation.
Covers cancelling the buzzer, silencing alarms, and resetting the system.
Explains how to stop the panel buzzer from sounding.
Details how to silence audible alarms.
Outlines the procedure for resetting the system after an event.
Explains the PRE FIRE and FULL FIRE conditions in coincidence detection.
Describes system faults, their indications, and initial actions.
Explains how to stop the panel buzzer from sounding during a fault.
Instructs on making log book entries for fault events.
Explains how multiple faults are indicated and logged.
Lists common fault messages, their meanings, and possible rectification actions.
Explains disablement conditions, their indications, and necessary actions.
Lists common disablement messages and their meanings/actions.
Describes how to perform a display test of the control panel.
Guides users on executing a display test of the panel.
Explains how to change the time and date on the control panel.
Provides steps for adjusting the panel's time and date settings.
Explains how to view and print the system's historic event log.
Guides users on accessing and printing the historic event log.
Explains how to view and print active fire events.
Guides users on viewing and printing active fire event logs.
Explains how to view and print active fault events.
Guides users on viewing and printing active fault event logs.
Explains how to view and print active disablement events.
Guides users on viewing and printing active disablement event logs.
Explains how to set the system to Day mode, Night mode, or None.
Provides steps to switch between Day, Night, or None modes.
Explains how to test, enable, or disable individual zones.
Guides users on managing zone status and testing.
Explains how to view, enable, or disable alarm sectors.
Guides users on managing alarm sector status.
Explains how to view loop connection maps and device information.
Guides users on accessing loop maps and device details.
Explains how to view details of interface device channels.
Guides users on viewing channel details for interface devices.
Explains how to enable/disable master alarms, fire relay, and evacuate input.
Guides users on managing master alarms, fire relay, and evacuate input.
Explains how to view the status and device count of the loop circuit.
Guides users on checking the loop circuit's status.
Explains how to view the panel's firmware versions.
Guides users on checking the panel's firmware versions.
Explains how to view the site data version.
Guides users on checking the site data version.
Details the 'Loop Repair' option for rectifying wiring faults.
Explains the purpose and use of the 'Loop Repair' function.
Provides general maintenance guidelines.
Provides instructions for replacing the glass on a manual call point.
Details how to reset the resettable element on a manual call point.
Recommends battery replacement intervals and safety precautions.
General| Brand | Gent |
|---|---|
| Model | Nano |
| Category | Security System |
| Language | English |
