Gent Nano - Site Data and Loop Repair Procedures; Site Data Version; How to view Site data version; Loop Repair Option

How to view 'Site data' version
You can view site data version. This form is accessible in the Customer Mode at Access level 2, see page 9.
The 'Loop Repair' option
"
Any wiring fault on the system must be rectified by an engineer from the
servicing organisation, for contact details see the log book. A wiring fault will require
correction to the wiring before running the 'Repair' option at the main panel.
The 'Loop Repair' option is normally used by a trained person when rectifying wiring faults. Under normal
circumstances it is unnecessary to use this option. The 'Repair' option is accessible in the Customer Mode at
Access level 2, see page 9.
25
NANO fire system
10:15 Mon 11/01/10
Site Data Version Details
Version Number: 003
Last Updated: 11-01-2010
Back
Select
System >
Select
Engineering
Menu
Versions
Select
Site Data
Select
Bac
k
10:15 Tue 12/01/10
Warning!- Ensure that the loop wiring faults
have been cleared before continuing
with this function!
Yes No
ARE YOU SURE YOU WANT TO PROCEED?
Select
Loop >
Select
User
Menu
Repair
Select
Yes