EasyManua.ls Logo

Gentech GP3500i - Battery Charging Safety and Restart

Gentech GP3500i
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
8.5.3 Be sure to connect the red battery charger lead to the
positive (+) battery terminal, and connect the black
lead to the negative (-) battery terminal.DO NOT
reverse the positions.
8.5.4 Connect the battery charger leads to the battery
terminals securely so that they do not disconnect due
to the engine vibration or other disturbances.
8.5.6 Change the battery by following the instructions in the
owner’s manual of the battery.
8.5.7 The DC Circuit Breaker will turn “OFF” automatically if
the current exceeds the rated output.
8.5.8 To restart charging the battery, turn the DC protector
on by pressing its button to the “ON” position.
8.5.9 Refer to the owner’s manual of the battery to
determine charging times.
Note: Never start or stop the generator with electrical
devices plugged in or turned on.