EasyManua.ls Logo

Gentech GP3500i - Pre-Operation Checks; Unpacking and Initial Inspection; Engine Oil Preparation

Gentech GP3500i
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
7. PRE-OPERATION CHECKS
7.1 UNPACK THE GENERATOR:
Remove the generator from its packaging.
Inspect the generator to ensure that no damage has incurred in
shipping or handling. If the unit appears to be damaged do not add
oil or fuel or attempt to start the generator.
Check to ensure that you have received the following items:
Generator
12V Charging Cables
Oil Funnel
7.2 ADDING THE ENGINE OIL:
The generator has been shipped without engine oil.
DO NOT add fuel or start the engine before adding engine oil.
In order to add engine oil, you will need to remove the side panel
from the generator see Figure 1