Gentech GP3500i - Air Filter Maintenance

To Next Page

To Previous Page

9.4 AIR FILTER MAINTENANCE

1. Remove the foam element -1.

2. Wash the foam element in

solvent and dry it.

3. Oil the foam element and

squeeze out excess oil. The

foam element should be wet

but not dripping.

NOTE: Do not wring out the foam

element when squeezing it as this

could cause it to tear.

4. Insert the foam element into

the air filter case. Be sure the

foam element sealing surface

matches the air filter so there is no air leak.

NOTE: Never operate the engine without the foam element.

5. Install air filter case cover, and screws.

9.5 MUFFLER SCREEN AND SPARK ARRESTOR

MAINTENANCE

This should be performed every 6 months or 100 hours. The

air filter may need to be cleaned more frequently when using

in unusually wet or dusty areas.