Genz Benz Shen Jr User Manual

OWNERS MANUAL
PRODUCT DESCRIPTION – The Shenandoah™ JR
an XLR balanced microphone input (with phantom power). The 2 inputs on channel 1 are summed (mixed) together
at a 1:1 ratio. Both channels are mixed together and pass through a 3 band equalizer with a sweepable midrange
frequency control. Equalization centers were carefully selected for use with acoustic instruments. Each channel also
contains individual send controls to the on-board Alesis® 15 program digital effects circuit. The channel signals are
The back panel contains an XLR balanced output with ground lift switch, unbalanced line output, and a 1/4” speaker
jack.
Features:
• 35 Watt Acoustic Amp • 2 Channel with separate Volume and Effects Controls
• 1– XLR and 2– 1/4” Inputs • XLR Direct Out
• Master Volume • 10” Speaker and Compression Tweeter
• Tilt-back Cabinet Design • Phantom Power
• Master 3-Band EQ with Sweepable Mid • Alesis® Digital Effects with 15 presets
1

Genz Benz Shen Jr Specifications

General

Brand	Genz Benz
Model	Shen Jr
Category	Amplifier
Language	English

Summary

Inputs and Operation

Input Specifications

Details XLR and 1/4" input impedance, sensitivity, and filtering.

Combining Inputs

Explains how to mix XLR and 1/4" inputs on channel 1 for 3-channel operation.

On-Board Digital Effects

Information on the Alesis effects processor, including programs and level controls.

Active Equalization

Describes the 3-band EQ with sweepable mid for tone shaping and feedback control.

Master Volume and Phantom Power

Guidance on master volume control and phantom power for microphones.

Direct Outputs

Details on XLR balanced and 1/4" unbalanced direct outputs, including ground lift.

Cabinet, Power, and Safety

Cabinet Design and Features

Describes the 10" woofer, compression tweeter, and tilt-back cabinet design.

Power Input and Fuse

Information about the power inlet cable and internal AC mains fuse.

Operating Cautions and Warnings

Safety precautions regarding amplifier placement, sound levels, and user service.

Warranty Information

Details on the 3-year limited warranty, coverage, and service procedures.

Engineering Specifications

Input Specifications Summary

Summarizes input impedance and sensitivity for XLR and 1/4" connections.

Amplifier Output Specifications

Details power output, THD+N for preamp and power amp, and frequency response.

Channel Equalization Specs

Lists frequencies and ranges for low, mid, and high equalization controls.

Direct Output Specifications

Provides levels and impedances for XLR balanced and 1/4" unbalanced direct outputs.

Digital Effects Processing

Details the Alesis DSP engine, converters, dynamic range, and sampling rate.

Internal Preset Effects Programs List

Enumerates the types and quantities of preset effects programs available.

Conformity and Compliance

Declaration of Conformity

States compliance with EEC directives and specific harmonized standards.