To Next PageTo Next Page
Need help?Do you have a question about the Genz Benz El Diablo 60 and is the answer not in the manual?
Describes the unbalanced, high impedance input for instrument connection.
Controls the gain for the Warm channel, from clean to pushed vintage sustain.
Preamp volume control for the Warm channel, balancing output with gain.
Three tone circuits (bass, mid, treble) for the Warm channel with 15db cut/boost.
Adjusts signal send level to the on-board Accutronics reverb.
Selects between Warm or Hot channels with LED indicators.
Sets gain structure for the Hot channel (Classic or High).
Changes Hot channel character between Dynamic and Compressed.
Controls Hot channel gain from clean to high gain.
Preamp volume control for the Hot channel.
Adds a tone stack within the preamp for mid-range or modern tone shaping.
Three tone circuits (bass, mid, treble) for the Hot channel with 15db cut/boost.
Adjusts signal send level to the on-board reverb for the Hot channel.
Boosts upper mid frequencies for enhanced pick attack and bite.
Provides variable "boost" to the Global Attack circuit.
Controls the return level of the on-board reverb.
Master volume control for the final output stage of the amplifier.
Removes high voltage from output tubes to protect them during warm-up.
Turns on the AC power to the amplifier, energizing all circuits.
Provides information for selecting correct fusing for international use.
Changes the AC power voltage (115V or 230V) for amp operation.
Connects the detachable power cord and houses the mains power fuse.
5-pin DIN connector for attaching the 4-button footswitch.
Serial effects loop for connecting external processors or other amps.
Unbalanced, line-level output derived after the power amplifier.
Parallel jacks for connecting to guitar cabinets.
Selects output transformer impedance for desired cabinet load.
Chart to determine correct impedance for connected speaker cabinets.
Switch to reduce output power from 60W (Pentode) to 30W (Triode).
Step-by-step procedure for adjusting the power tube bias voltage.
Recommended settings for a tight, grindy tone with edge.
Recommended settings for a classic "brown" sounding tone.
Recommended settings for a high-gain British stack sound.
Recommended settings for warm, vocal solo tone.
Recommended settings for touch-sensitive break-up and warmth.
Recommended settings for heavy rhythm tones with bark and grind.
Recommended settings for a big, gritty tone.
Recommended settings for expressive lead tone with gain clarity.
Recommended settings for great vintage blues overdrive.
Recommended settings for a warm jazz tone.
Recommended settings for Chicago blues tone with reverb.
Lists the types and quantities of tubes included in the amplifier.
Specifies the output power ratings in Pentode and Triode modes.
Indicates the maximum power the amplifier consumes during operation.
Details the main power fuse and power tube heater fuse ratings.
Instructions for safely removing and installing power tubes.
Instructions for safely removing and installing preamp tubes.
Outlines the terms and duration of the product warranty.
General
