Need help?Do you have a question about the Geo Knight Digital Knight DK20 and is the answer not in the manual?
General| Brand | Geo Knight |
|---|---|
| Model | Digital Knight DK20 |
| Category | Power Tool |
| Language | English |
Identifies the main physical parts of the heat press machine with labels.
Explains the indicators and keys on the digital controller display screen.
Covers workbench stability, height, and power cord connection for safe operation.
Explains the screen indicators for temperature, time, and status.
Details how to use the TEMP key and arrow keys to set desired temperature.
Explains using arrow keys to set time and reset to 00.
Details how to set and activate the pre-press timer feature.
Explains using the pressure knob to decrease or increase pressure.
Warns about potential detachment if pressure is adjusted too far.
Explains the bar graph scale and guidelines for pressure levels.
Details how to use the auto-release and important notes.
Provides tips for pressing shirts, garments, and substrates.
Lists recommended temperature and time settings for various transfer types.
Explains loss of temperature signal and how to resolve the ERR message.
Details how to respond to the alarm and prevent overheating.
Explains how presets store temperature, time, and pressure settings.
Details the steps to select and load a saved preset.
Guides users through modifying and saving preset values.
Step-by-step instructions for programming two distinct presets.
Demonstrates how to load programmed presets for daily operation.
Explains the key combination to enter the user menu system.
Describes how to switch between Fahrenheit and Celsius display.
Explains how to set timer units to seconds or hours.
Explains the cycle counter and how to reset it to zero.
Details how to calibrate the pressure bar graph's '0' point.
Details how to calibrate the pressure bar graph's '9' point.
Explains how to set an alarm for temperature deviations.
Guides on how to turn the keypad beep sound on or off.
Explains how to select different beeping patterns for timer alarms.
Explains how to enable or disable a beep before timer completion.
Details how to turn the secondary prepress timer on or off.
Explains how to set alarm patterns for the prepress timer.
Explains how to prevent unauthorized setting changes.
Describes the feature of swapping lower tables for different needs.
Covers key components to monitor for wear and proper operation.
Lists part numbers for common replaceable components of the press.
Details the electrical connections for the heat press controller and platen.
Addresses issues with the timer activation and reset, likely sensor related.
Explains causes of the ERR message and how to fix sensor connections.
Covers lack of response or sound from the keypad and controller connections.
Addresses issues with gas springs losing pressure and replacement.
Guides on diagnosing power failures and identifying faulty components.
Provides methods for cleaning burned-on transfer material from the heat platen.
Details the warranty period, coverage, and exclusions for the press.
Provides contact details for Geo Knight & Co Inc.
To Next Page
