Now
Electricity Gas
2.63 kW 1.36 m
3
Today
Home
Prepay
14:37
Use arrow buttons
to move between
Now, Today
and Prepay (if
applicable) tabs.
Introduction
The Trio II shows energy use for electricity and gas smart
meters and will have been congured to work with the meters
you have installed, which may be electricity, gas or both.
Please read the important safety notice overleaf before
using your monitor.
Setting up
Connecting the power supply
Connect the power supply to your Trio II. Your monitor
will turn on automatically when you plug it into the mains.
You should always leave your monitor connected to the
power supply.
You can congure the screen on the monitor to dim or switch
o at certain times of the day. (See
Settings > Display)
The power supply has been made exclusively for the Trio II
monitor and must not be used with other devices.
Using batteries
Your monitor can optionally be used with 3 x AAA (LR03)
non-rechargeable batteries.
Remove the back cover and insert the batteries, as marked
on the inside case. Reattach the back cover and the monitor
will show the battery symbol (
o
) at the top of the screen.
It’s advisable to power the monitor with the supplied power
supply and to not use batteries for a prolonged period.
Smart meter connection
Each time the monitor is turned on it will show Connecting
to smart meter... while establishing a connection. This can
take up to ve minutes.
It may take up to one hour after the initial setup for the gas
consumption to show on the screen.
Overview of the monitor and the Home screen
The LED at the bottom of the monitor
shows your electricity usage (GREEN
for low, AMBER for medium or RED for
high) or BLUE for gas-only setups.
The title of the
screen shown and
the current time.
The ame shows
the recent rate of
gas consumption
(typically over the
last 30 minutes).
Press to switch between
cost or energy consumption
whilst on Home screen.
The left of the screen shows the current
rate of electricity consumption. As
appliances and lights are switched on
and o, the dial needle will move.
If you only have a
gas smart meter,
then the electricity
dial is not shown.
The rate of
consumption is
shown in cost per
hour or, if kW is
selected, the rate of
energy being used.
Press to enter
Menu whilst on
Home screen.
Press to return
to
Home.
Press to return to
previous screen.
Use the
b c
buttons to navigate
around the screen.
Menu
The main menu is only available from the Home screen. To
select it, touch the t button at the bottom of the screen.
Electricity/Gas usage
Detailed information on the electricity consumption for the
day, week, month and year.
System status
Quick indicator of whether the system is working OK (GREEN)
or if there is something that needs attention (AMBER or RED).
Meter balance
Information on the cost of used energy (credit meter) or
balance available (pre-payment meter).
Prepay (prepay customers only)
Top up your current balance, activate emergency credit and
view your top-up history.
Tariffs
Displays the current and next electricity and gas prices.
Debt (prepay customers only)
Outstanding debt with your utility provider will be outlined
with a breakdown of the charges and recovery rate.
Inbox
View messages received from your utility provider(s). New
messages will be shown on the
Inbox screen automatically.
Meters
Information on your electricity or gas meter and the current
meter readings.
Support
Contact details for your utility provider(s), (may include a
telephone number and email address).
Settings
Personalise your Trio II within the Settings screen.
TR2L-A-QRG-001_3.indd 2 30/05/2017 11:54
To Previous Page
Loading...
Need help?
General
