GeoMax Zenith15 User Manual

Button Function
Switches the Zenith15/25 Pro between rover or base
mode.
Press and hold button for 3 s.
Updates the base position coordinates when
Zenith15/25 Pro is in base mode. The RTK base LED
flashes for 2 s. When no position is available, the LED
flashes red.
Press and hold button for 5 s.
Connects to the configured RTK base station or NTRIP
server when the Zenith15/25 Pro is in rover mode.
The RTK rover LED flashes for 2 s. No action if a rover
mode is not configured.
Instrument Components 12
en

GeoMax Zenith15 Specifications

General

Brand	GeoMax
Model	Zenith15
Category	Receiver
Language	English