Need help?Do you have a question about the GeoMax Zenith35 Pro Series and is the answer not in the manual?
General| Receiver Type | GNSS |
|---|---|
| RTK Accuracy (Horizontal) | 8 mm + 1 ppm |
| RTK Accuracy (Vertical) | 15 mm + 1 ppm |
| Static Accuracy (Vertical) | 5 mm + 0.5 ppm |
| Operating Temperature | -40°C to +65°C |
| Signal Tracking | GPS, GLONASS, Galileo, BeiDou, SBAS |
| Communication Interfaces | Bluetooth, USB |
| Frequency | L1, L2, L5 |
Provides general safety guidance and explains warning message types (DANGER, WARNING, CAUTION, NOTICE).
Highlights risks like electrocution near electrical installations.
Covers risks like distraction, site security, accessory use, and lightning strikes.
Explains EMC and potential interference issues with other equipment.
Lists and describes the main components of the GNSS system.
Explains software, power, and data storage concepts for the instrument.
Identifies and illustrates the physical components of the Zenith35 Pro.
Describes the functions of the ON/OFF key, Function key, and key combinations.
Step-by-step instructions for setting up the instrument as a real-time base station.
Instructions for setting up the instrument for static operations over markers.
Step-by-step guide for configuring the instrument as a real-time rover.
Operating principles, charging, and discharging guidelines for the instrument batteries.
To Next Page
