To Next PageTo Next Page
Need help?Do you have a question about the GEONAUTE WS500 and is the answer not in the manual?
Crucial information for proper device usage and step-by-step procedure adherence.
Lists all required items for initializing or troubleshooting the device.
Steps to initiate data transmission between the station and sensors.
Automatic time setting via atomic clock and signal reception quality.
Procedure to enter setting mode using the MODE button.
Instructions for properly sealing and positioning the sensor.
Procedure for installing and configuring multiple sensors.
Guide to installing batteries in the main station unit.
How to reset the station's measurements.
How to view outdoor temperature readings on the station.
Information on weather condition display and forced initialization.
Guidelines for placing the station and sensors, respecting distance recommendations.
How to check if sensor data is displayed and re-initialize transmission if needed.
General| Brand | GEONAUTE |
|---|---|
| Model | WS500 |
| Category | Weather Station |
| Measurement Parameters | Temperature, Humidity, Wind Speed, Rainfall, Barometric Pressure |
| Humidity Range | 20% to 95% |
| Rainfall Measurement | Yes |
| Power Supply | Battery |
| Display | LCD |
| Connectivity | Wireless |
| Wind Speed Range | 0 to 50 km/h |
| Transmission Range | Up to 100m (in open field) |
| Wireless Range | Up to 100m (in open field) |
| Temperature Range | -20°C to +60°C |
