To Next Page
R
Ricardo BradleyJul 29, 2025
What to do if my GEONAUTE WS300 isn't showing the outdoor temperature?
- MMichael HansonJul 29, 2025
If your GEONAUTE Weather Station displays '--.--' in the outdoor temperature field, it indicates a connection issue. This can happen if the sensor signal isn't being received. Try forcing a reset by pressing the SEARCH button. The symbol above the OUT symbol will flash while reconnecting. Ensure the sensor is upright using the provided stand, and that it's not too far from the station or obstructed by walls or other interference. Also, check and replace the sensor batteries, then reset the transmission using the SEARCH button.
General
