6
BEFORE FIRST USE
1. Remove all packing material, any stickers, and the plastic band around the power
plug.
2. Remove and save instruction booklet.
3. Wash all removable parts as instructed in CARE AND MAINTENANCE section of this
manual.
CAUTION: Handle blades very carefully. They are sharp.
4. Select a dry, level countertop where the appliance is to be used, allowing air space on
all sides to provide proper ventilation for the motor.
1 2 3
ASSEMBLY
• Sit the appliance on a dry, stable, level surface.
• Route the cable so it doesn’t overhang, and can’t be tripped over or caught.
• Don’t plug it in until you have nished assembling it.
1. Put the container underneath the opening on the motor unit.
2. Put the chosen blade into the opening on the motor unit (Fig. 1).
3. Put the feeder chute into the opening then turn it counter clockwise until it locks (Fig 2).
To Next Page
Loading...
Need help?
General
