Need help?Do you have a question about the Geoscan Pioneer Mini and is the answer not in the manual?
Protective covers for the drone's propellers.
The drone's propulsion units.
The power source for the drone.
Sensor for visual tracking and position control.
Camera for capturing images and video.
Slot for memory card storage.
The rotating blades that provide lift.
Port for charging or data transfer.
Port for connecting additional modules.
Install the drone motors into the frame arms, ensuring correct wire routing.
Place motor wires into designated grooves under each drone arm.
Mount the main board onto the drone frame and connect motor connectors.
Attach top cover, rubber landing dots, and acoustic band.
Carefully insert the battery and connect its connector to the main board.
Attach propellers to motor shafts and lock them by rotation.
Lock the propeller guards onto the drone arms securely.
Insert the microSD card into its slot on the drone.
Charge the drone battery using the microUSB cable and a PC or USB charger.
Sensor for visual tracking and position control in airspace.
To Next Page
General