EasyManua.ls Logo

Gerhardt Vapodest 20 - Technical Description and Specifications; Technical Data

Default Icon
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C. Gerhardt GmbH & Co. KG
4
VAPODEST 20
1 Technical description
Warranty conditions
The Vapodest 20 is manufactured following the high quality gui-
delines of DIN EN ISO 9001.
On the basis of the C. Gerhardt conditions of warranty our pro-
ducts are guaranteed for 1 year, as long as the apparatus is used
in accordance with the instructions mentioned in this manual.
Please note that the semi-consumable parts are excluded from
warranty.
Technical data
Voltage: .................... 230 V AC, 50 Hz
Wattage: ................... 1600 W
Cooling water: .......... about 3 litre per distillation minute
Cooling water
pressure .................. > 0,5 bar
Pump capacity:
-Diaphragm pump ... about 15 ml/s with water
about 10 ml/s with NaOH
-Peristaltic pump ..... about 10 ml/s with water
Store tank: ................ any size, recommended: KAN 20
Micro controller: ........ Single-chip MCU
Display: .................... 5 x 7 LED
Program: .................. 1
Interface: .................. RS 485
Dimensions: ............ 440 x 690 x 340 mm (W x H x D)
Weight: ..................... 25 kg
Baud-rate: ................ 9600
Data-bits:.................. 8
Parity: ....................... No
Start bit: .................... 1
Stop bit: .................... 1
Mode:........................ Semi-Duplex
User: ........................ Maximum 32
Connection: .............. D-Sub 9-pin acc. to DIN 41 652
Warranty
Distillation
System
Interface

Related product manuals