P.7
Installation Instructions
Things to check before installation
• To avoid the constant danger when using electrical appliance, it is important to properly install
this range hood and read the safety instructions carefully to avoid misuse and danger. We
recommend that you keep this instruction manual for future reference and pass it to any future
owners. After unpacking the range hood, check that the range hood is intact. When in doubt, do
not use the device.
• Check the package and make sure you have all of the parts listed.
• Decide on the appropriate location for your product.
• If this product contains glass, please take care with tting or handing to prevent personal injury or
damage to the product.
• The specications plate is available on the appliance. This plate displays all the necessary
identication information for ordering replacement parts.
• If you sell the appliance, give it away, or leave it behind when you move house, make sure you
also pass this manual to the new owner, so that the new owner can become familiar with the
appliance and its safety warnings.
Installation Tools
1
7
2
8
3 4 5 6
1. Phillips Screwdriver
2. Spirit Level
3. Pull Ruler
4. Electric Drill
5. Drill bit (Ø8mm)
6. Pencil
7. Aluminium Tape
8. Ducting Tube (Ø150mm)
To Next Page
Loading...