Need help?Do you have a question about the Gerni 118 P and is the answer not in the manual?
General introduction to the high pressure cleaner and its operation manual.
Detailed description of the high pressure cleaner's components and functionality.
Guidance on using a fine sand filter to prevent damage to the machine.
Instructions for handling the high pressure hose to prevent damage and ensure safety.
Information on the Turbo Laser nozzle and its cleaning efficiency.
Step-by-step guide for starting the high pressure cleaner safely and correctly.
Procedure for safely stopping the high pressure cleaner.
Instructions for using the detergent feature on the 600 PX model.
Procedure for checking and refilling the pump's oil level.
Schedule and procedure for changing the pump oil.
Instructions for cleaning the water filter.
Instructions for cleaning the Turbo Laser filter and lance.
Method for protecting the machine from frost damage.
General advice on keeping the high pressure cleaner clean.
Guidance on proper disposal of replaced parts and old machines.
Troubleshooting steps when the machine fails to start.
Steps to diagnose and resolve sudden machine stoppages.
Causes and solutions for excessive pump pressure.
Troubleshooting fluctuating or low maximum pressure.
Identifying and resolving shaking of the high pressure hose and pistol.
Diagnosing issues with the by-pass valve or pressure gauge.
Steps to take when there is no detergent supply.
Addressing safety valve activation or over-pressure situations.
Troubleshooting issues with nozzle oscillation.
Resolving leaks from the Turbo Laser.
General| Brand | Gerni |
|---|---|
| Model | 118 P |
| Category | Pressure Washer |
| Language | English |
To Next Page