What to do if my GET DHMD163 is not collecting water?
If your GET Dehumidifier isn't collecting water, the air intake filter might be blocked, so try cleaning it. Also, the refrigerant level could be low, requiring a return for service. In some cases, the temperature and humidity might be too low, which is a normal function.
What to do if the condenser is frozen on my GET DHMD163 Dehumidifier?
If the condenser in your GET Dehumidifier is frozen, the filter might be dirty; try cleaning it. Another reason might be that the temperature is too low; switch off the unit and wait for the temperature to rise.
Why is my GET Dehumidifier leaking water?
If your GET Dehumidifier is leaking, the water tank might not be installed properly; ensure it is correctly fitted. Alternatively, there could be a micro switch failure, requiring a return for service. Another possibility is that the unit has frozen; unplug it and allow the ice to melt.
Why are the fan and compressor not working on my GET DHMD163 Dehumidifier?
If both the fan and compressor on your GET Dehumidifier aren't working, the unit might not be getting power. Check the power to the socket and ensure that the power is switched on.
What to do if the compressor or fan is not working on my GET DHMD163 Dehumidifier?
If the compressor or fan isn't working on your GET Dehumidifier, it could be due to motor failure or faulty electronics, both requiring a return for service. Alternatively, the unit might be in a time delay period; simply wait.
Covers essential safety guidelines for operating the dehumidifier safely and avoiding hazards.
Step-by-step instructions for safely replacing the appliance's power plug.
Steps for turning on the unit, setting fan speed, and humidity levels.
Detailed steps for setting the timer to automatically switch the unit on or off.
Procedure for connecting a hose to enable continuous water drainage from the unit.
General| Brand | GET |
|---|---|
| Model | DHMD163 |
| Category | Dehumidifier |
| Language | English |
To Next Page
