Name: Getac T800
Brand: Getac
Rating: 4 (1 reviews)

To Next Page

Using the T800 Second Battery Pack

Charging the Battery Pack

This second battery pack is a snap-on module to provide T800 with

extra battery power.

To charge the battery pack, connect the AC adapter. The Battery

Charge Indicator ( ) glows amber to indicate that charging is in

progress. It takes approximately 3 hours to fully charge the battery

pack. When the battery is fully charged, the indicator glows green.

NOTE:

 For proper operation, make sure T800 is NOT connected to AC

power whenever you try to attach or detach the second battery

pack.

 After you attach the second battery pack and connect AC power

to T800, the main battery will be charged first and then the

second battery.

Connecting the Battery Pack

1. Align the module with the back of T800, engage the module’s

bottom tab first and then snap the top tab into place.

Other manuals for Getac T800

Questions and Answers:

Need help?

Do you have a question about the Getac T800 and is the answer not in the manual?

General