14
Instructions for use
5018610-00 Rev.D Edition 0703
Alarms
If the red lamp at O lights up, the process has been aborted because of a fault.
The display shows a fault code.
Fault indications
Acknowledging a fault code
Acknowledge the fault code by:
• Note the fault code
• Cancel the acoustic signal by pressing U . The machine remains locked but
the program has been stopped. The display shows the password entry menu.
• Correct the fault or call service personnel.
• Enter the password (558387) using the arrow keys and press S. All liquid is
drained from the machine and the soiled-side door is unlocked*.
• Open the door and remove the items.
The items in the machine are not clean and must be washed again from the
beginning with a new program.
If the items are still hot, handle them with care to avoid burns.
* If the drain pump is faulty, water cannot be drained from the machine and the fault cannot be put right
until the door has been opened. The soiled-side door is unlocked as soon as a the password is confirmed.
Fault codes in the machine
Fault codes indicate that a serious fault has occurred in the machine or the washing
process. The fault must be put right by an authorized service technician.
The following fault codes may occur:
Fault code Description of fault
F00 Power failure
F01 Motor cutout has tripped.
F02 Water filling takes more than 10 minutes.
F03 Draining takes longer than five minutes or there is water remaining in
the washing chamber at the end of the draining phase.
F04 Water leakage in the drying unit.
F05 Soiled-side door does not lock within 10 seconds of program start or
the door is opened while a program is running.
F06 Soiled-side door does not unlock within 10 seconds of the end of a
program.
F01
To Next Page
Loading...
Need help?
General
