Getinge 46-4 Instructions For Use

8
Instructions for use
5018610-00 Rev.D Edition 0703
control system
The machine has an electronic controller which can hold up to 10-15 programs. Six
of these programs can be chosen with the program selection buttons. Other
programs are chosen with the menu buttons; see Operating instructions.
The machine comes with a number of standard programs in the control system (see
the separate program sheet). Contact the your reseller for customized programs.
Programming may only be done by authorized personnel.
Door function
46-2 is fitted with a single door. 46-4 and 46-5 are fitted either with a single door or
with double doors.
Machines with double doors have a system of interlocks to ensure that only one
door can be opened at a time. This means that the clean-side door must be closed
before the soiled-side door can be opened.
When you press V, the door is locked and a yellow lamp flashes for about 10
seconds. If you press Vagain during this “cancel time”, the soiled-side door is
unlocked and the door can be opened.
When the program is complete, a green lamp lights up on both sides (if there are
double doors) and the clean-side door is unlocked. When the door has been opened
manually, the green lamp goes out. With double doors, the clean-side door must be
closed before the soiled-side door can be unlocked.
V398
Soiled sideClean side
General

Getinge 46-4 Specifications

General

Brand	Getinge
Model	46-4
Category	Washer
Language	English