© Copyright
The content of this manual must not be copied, in
whole or in part, without the written consent of Getinge.
FOREWORD
This service manual is intended for maintenance and service personnel working with
Getinge 88-series washer disinfectors.
The service manual is divided into the following sections:
Safety regulations•
Introduction to the machine•
Software description and menu tree•
Preventive maintenance•
Fault indications and troubleshooting•
Repair and adjustments•
Electrical diagram of the washer disinfector•
Monitoring system (Option)•
Electrical diagram of the monitoring system•
The purpose of the service manual is to provide information for the maintenance and
servicepersonnelwhosejobitistoensuresafeoperationwithoptimumefciency.
See under Intended use on page 8.
Before starting work on the machine, the maintenance and service personnel must have
read the safety instructions in this manual and familiarized themselves with the operation
of the machine and its safety instructions. They must also have done a service training
course at Getinge Academy
Read the safety instructions in the service manual before starting work on
the machine.
The information in this manual describes the machine as dispatched from Getinge.
There may be differences due to customization.
The machine is accompanied by the following documentation:
User manual•
Installation manual•
Technical manual (this book)•
Spare parts list•
Goods positioning instructions•
The goods positioning instructions supplied must be put up in a clearly visible position
at the time of installation.
Getingereservestherighttochangethespecicationanddesignwithoutpriornotice.
The information in this manual was up to date on the date of issue of the manual.
To Next Page
Loading...
Need help?
General
