Need help?Do you have a question about the Gewiss 90 Series and is the answer not in the manual?
Explains how to set up and use the device in automatic mode, including auto-restart features.
Details how to operate the device manually and switch between automatic and manual modes.
Instructions for mechanically coupling the device and connecting power and load cables.
Explains how to set up and use the device in automatic mode, including auto-restart features.
Details how to operate the device manually and switch between automatic and manual modes.
Instructions for mechanically coupling the device and connecting power and load cables.
General| Type | Miniature Circuit Breaker (MCB) |
|---|---|
| Poles | 1P, 1P+N, 2P, 3P, 3P+N, 4P |
| Curve | B, C, D |
| Terminal Type | Screw terminals |
| Storage Temperature | -40°C to +70°C |
| Protection Degree | IP20 |
| Rated Voltage (Un) | 230/400V AC |
| Breaking Capacity (Icn) | 6kA, 10kA |
| Standard | EN 60898-1 |
| Mounting | DIN rail |
| Mechanical Life | 20, 000 operations |
| Electrical Life | 10, 000 operations |
To Next Page
