Need help?Do you have a question about the Gewiss RESTART RD 90 Series and is the answer not in the manual?
Details the procedures for configuring and using the device in automatic restart mode.
Explains how to manually operate the device and switch between automatic and manual modes.
Provides step-by-step instructions for the physical assembly and electrical connection of the device.
Illustrates the electrical wiring configurations for installing the device in different scenarios.
General| Series | RESTART RD 90 |
|---|---|
| Type | Residual Current Circuit Breaker with Overcurrent Protection (RCBO) |
| Mounting | DIN Rail |
| Poles | 1P+N |
| Breaking Capacity | 6kA |
| Curve | C |
| Standards | EN 61009-1 |
| Residual Current Tripping | 30mA |
| Mechanical Durability | 20000 cycles |
| Electrical Durability | 10000 cycles |
| Terminal Type | Screw terminals |
| Rated Current | 6A, 10A, 16A, 20A, 25A, 32A, 40A |
To Next Page
