GEZE E260 Series User Manual

grn
rot
rot blinkend
Notstrom
steuerzentrale
Emergency Pow
er Control System
E 260 N
OK
S
törung
Netzausfall
O
K
Fault
Pow
er outage
grün
gelb
gelb blinkend
green
yellow
yellow flashing
Connection Schema
RWA Emergency Power Supply System
E260 N2/N4/N8/N12
118533-4 Connection Schema Emergency Power Supply System E260 N2/1 to N12/2-24V DC

GEZE E260 Series Specifications

General

Brand	GEZE
Model	E260 Series
Category	Power Supply
Language	English

Summary

Short description

Layout plan

Mains connection

Connection of the battery

Explains how to connect the backup battery to the E260N system.

Connection of smoke and heat difference sensor

Describes the connection of smoke and heat difference sensors to the E260N.

Operation without smoke or heat difference senosr

Covers operational modes when smoke or heat difference sensors are not connected.

Connection of SHE switch FT4/24V DC - VdS

Connection of fire alarm system (BMS) / remote trip release

Details how to connect the E260N to a fire alarm system (BMS) or remote trip release.

Operation without central fire alarm system (BMS) / remote trip release

Explains operation when a central fire alarm system is not used.

Connection of motors

Linear, 1 cable section

Wiring instructions for motors connected in a linear fashion using a single cable section.

Branched, 2 or more cable sections

Wiring for motors in branched configurations with multiple cable sections.

Connections of motors without integrated line monitoring

Unused motor group

Motor lines

Calculation of the cross-sections for motor lines

Formula and method for calculating required motor line cross-sectional areas.

Examples for max. line lengths in [m]

Provides examples of maximum permissible line lengths for motor connections based on current.

Connection of ventilator switch

Connection of several ventilator switches per ventilator group

Ventilator switch LTA-230

Specific connection details for the LTA-230 ventilator switch.

Connection of timer

Timer per ventilator group

Connecting a single timer to control one ventilator group.

Several ventilator groups with 1 timer

Configuring one timer to manage multiple ventilator groups.

Connection of rain/wind control unit

Connection of several emergency power control units E260N to 1 rain/wind control unit

Linking multiple E260N units to a single rain/wind control unit.

Potential-free signaling contacts (optional)

Connection with externals supply voltage

Connecting the E260N using an external supply voltage source.

Connection of a sounder with internal supply voltage (max.30mA)

Wiring a sounder with internal supply voltage to the E260N system.