GEZE TSA 160 - Certificate of Conformity

2
Planungsunterlage TSA160 Datei 84338PuTSA160_GB_200999_.p65
MATERIALPRÜFUNGSAMT NORDRHEIN-WESTFALEN
Prüfstelle, Überwachungsstelle und Zertifizierungsstelle gemäß § 28 BauO NW
CERTIFICATE OF CONFORMITY
Reg.-No. 12 9820 - DO 14.1
This is to certify in accordance with § 22 para.2 No. 2 of the Building Code (Landesbauordnung) for the Land
Baden-Württemberg, that
the building products: Swing door drive ‘’GEZE TSA 160 ’’ complies with
the requirements
• set forth by the technical rules in accordance with the Technical Schedule A part 1 (edition 98/2),
consecutive number 6.14 of DIN 18 263-4
the manufacturer:
GEZE GmbH
Postfach 1263
D-71229 Leonberg
the production plant: GEZE GmbH
Reinhold-Vöster-Str. 21-29
D-71229 Leonberg
in accordance with the results of the
• product tests carried through by the MPA NRW
• internal product control carried through by the producer
• foreign control carried through by the MPA NRW
The manufacturer is therefore entitled to mark the building products, the packing or the delivery note with the
sign of conformity (Ü-sign) in accordance with the ordinance regulating conformity signs.
Dortmund, 12.12.2000
Marsbruchstraße 186 • Dortmund-Aplerbeck • Postanschrift: 44285 Dortmund • Telefon (0231) 4502-0 • Telefax (0231) 4502 586