To Next PageTo Next Page
Need help?Do you have a question about the GFI System CABZEUS MONO and is the answer not in the manual?
Describes the function of the top-left knob for speaker type and cab type selection, and the top-right knob for mic position.
Details the function of the bottom-left knob for preset selection and the bottom-right knob for storing presets and adjusting headphone delay.
Step-by-step guide on how to select preset locations, find desired sounds, and store current settings.
Explanation of the stereo-enhancement technique for headphone output and how to adjust the delay.
Information on the 3.5mm headphone output, including its stereo width adjustment capability.
Details on the unbalanced input, input pad for signal attenuation, and the DC power jack specifications.
Explanation of the hardwired thru output and its connection options to amps, load boxes, or speaker cabinets.
Guide to selecting guitar and bass speaker models and their corresponding real-world emulations.
The Cabzeus Mono is a compact device designed to enhance and simulate guitar and bass cabinet sounds, offering a range of features for both live performance and studio recording. It functions as a cabinet simulator, allowing users to bypass the need for a physical speaker cabinet while still achieving authentic amplified tones.
The core function of the Cabzeus Mono is to simulate various speaker types and cabinet configurations. It processes the input signal, transforming it to sound as if it's coming from a miked speaker cabinet. This is particularly useful for direct recording, silent practice, or sending a consistent, high-quality signal to a front-of-house mixer without the variables of a physical cab and microphone setup.
The device features two main rotary knobs, each with distinct functions based on turning, pushing, or holding. The upper-left knob primarily controls speaker type selection. By turning this knob, users can browse through a variety of guitar and bass speaker models, each emulating a specific brand and size (e.g., 10-inch, 12-inch, 15-inch). Pushing this knob toggles between "OPEN-BACK" and "CLOSED-BACK" cabinet types, which significantly alters the sonic characteristics, mimicking the resonance and dispersion properties of different physical cabinet designs. Holding this knob allows users to bypass or engage the cabsim entirely, providing flexibility for different signal chain setups.
The lower-right knob is dedicated to mic position adjustment. Turning this knob allows fine-tuning of the simulated microphone placement relative to the speaker, which dramatically impacts the tone, from bright and direct to warmer and more ambient. This offers a powerful way to sculpt the final sound. This knob also manages preset selection and storage. Pushing it toggles between two "FAVE" (favorite) preset locations (Fave-1 and Fave-2), indicated by corresponding LEDs. Holding this knob stores the current settings to the selected FAVE slot, making it easy to recall preferred sounds.
The Cabzeus Mono also incorporates a stereo width enhancement feature specifically for its headphone output. This involves applying a short delay to the right channel of the headphone audio, creating a more spacious and immersive listening experience. The amount of this delay is adjustable, ranging from 0 ms to 30 ms, and can be set by "twisting the knob" – turning the lower-right knob while holding it down. This delay setting is saved as part of the preset.
The device includes a "Thru" output, which is hardwired to the input jack. This allows for flexible routing, such as connecting to an amp's input or, if the tube amp's speaker out is connected to the Cabzeus Mono's input, connecting the Thru output to a load box or a physical speaker cabinet.
An "Input Pad" feature is also present, allowing users to attenuate high input signal levels. This is crucial for preventing overload or clipping, ensuring a clean signal even with powerful sources like an amp's speaker out.
The Cabzeus Mono is designed for intuitive operation. To begin, users select their desired speaker and cabinet type using the upper-left knob. They then fine-tune the mic position with the lower-right knob to achieve the desired tone.
Saving presets is straightforward:
The headphone output provides a convenient way for silent practice or monitoring. The adjustable stereo width enhancement allows users to customize their listening experience.
The input is versatile, accepting signals from pedals, an amp's speaker out, or an amp's FX-Loop Send. The input pad ensures signal integrity across various sources. The balanced output, while not accepting phantom power, is designed to withstand accidental phantom power application without damage, offering robustness for professional setups.
While the manual does not explicitly detail "maintenance features" in the traditional sense (e.g., cleaning instructions or user-replaceable parts), the design implicitly suggests ease of use and durability. The robust construction, indicated by the metal enclosure and sturdy knobs, implies a device built to withstand regular use in various environments.
The balanced output's resilience to accidental phantom power application is a practical "maintenance" feature, as it prevents common user errors from damaging the unit, thereby extending its lifespan and reducing the need for repairs.
The clear labeling of controls and indicators (LEDs for Fave presets, speaker type display) simplifies operation and troubleshooting. The availability of a full user manual and warranty registration on the manufacturer's website further supports long-term usability and support. The device's reliance on a standard 9VDC/120mA power supply (negative-center, 2.1mm) means easy replacement if the original adapter is lost or damaged.
In summary, the Cabzeus Mono is a powerful and user-friendly cabinet simulator that offers extensive tonal shaping capabilities, flexible routing options, and thoughtful design elements to ensure reliable performance and a satisfying user experience.
General| Type | Cabinet Simulator |
|---|---|
| Input Impedance | 1 MΩ |
| Frequency Response | 20 Hz - 20 kHz |
| Power Supply | 9V DC (center negative) |
| Bypass | Buffered |
| Weight | 350 g |
