GGMgastro SEMB40 - Page 13

13
hopper
machine more
than 45 minutes
then restart and
press clean
button
Check whether
only use one side
handler
Check pre
hardness settings
whether is too
hard
Check whether
you do not use
the machine for a
long time
CB
Reset Switch
abnormal
Check reset
switch whether
reset or not
Make the reset
switch on reset
Check plunger
whether reset or
not
Make the plunger
reset
UL
Voltage
The voltage is too
low
Turn off the
machine and
check the circuit
UH
The voltage is too
high
PS: How to get Max production
Left side 2 cups, then right side 2 cups, in this interval way When
no output, the compressor will auto restart every 15-20
minutes.
Thanks for your attention and your carefully reading.
If you have any other questions, you can contact our sales directly.
Appendix1 Machine Testing Notice
1: No one cylinder operate
Output need left side-right side-left side-right side. The ingredient need filled
2/3 of each hopper. If ingredient shortage, can not provide enough output
pressure, the ingredient will stay in cylinder and frozen cylinder.