14
2: Expansion tube Using
(Expansion tube function: increase fit expansion rate, No need use during ice
cream production.)
Expansion tube need professional ice cream machine operators operate.
a. Pour ingredients into hopper, then pull the end of dispenser door air gate
tube, until the ingredient flow out.
b. Insert expansion tube to the charging hole(Ingredients need higher than the
expansion tube charging hole)
c .Press ‘AUTO’ Start auto ice cream production, first 5-8 cups ice cream is
cylinder ingredient, so the expansion rate feeling is not higher than with
expansion tube.
d. If the ingredients is little or more foam, pull out the expansion tube, if you
need very large output in a short time, you need pull out the expansion tube,
because the input is not direct proportion with output, or the ingredient can
not flow easy to the cylinder, it will be cause ingredient shortage in the
cylinder.
e. If the density of ingredient is very thick, we do not suggest you use
expansion tube.
Appendix2 Cylinder Frozen Introduction
To Next Page
Loading...