GHARiENi Lina Select Alu - User Manual

Instruction Manual
Treatment Tables of the Lina Select line
Lina Select Alu
Lina Select Wood
Lina Select Static
Fig. similar: colour, upholstery and equipment may vary depending on model.
Gharieni Group GmbH
Am Schürmannshütt 24
D - 47441 Moers
➢ Phone:
+49 (0)2841/88300-0
➢ Fax:
+49 (0)2841/88300-999
➢ Customer service hotline:
+49 (0)2841/88300-40
➢ E-mail:
service@gharieni.com
➢ Web:
www.gharieni.com
Empty field for entering the SERIAL NUMBER.
The serial number of the treatment table is on the
rating plate (s. chapter 7. RATING PLATE).

Summary

Safety Information and Precautions

Safety Information

General safety precautions when using electrical products.

Abbreviations

Explains abbreviations used in the manual.

Signal Words

Defines signal words for hazard communication.

Safety Instructions

Instructions to reduce electrocution and other risks.

Intended Use and Delivery

Intended Use

Specifies the proper use and limitations of the table.

Scope of Delivery

Lists items included with the treatment table package.

Delivery and Unpacking

Guidelines for receiving, handling, and safely unpacking the unit.

Transport, Installation, and Setup

Transport and Space Requirement

Advice on safely transporting and required space for the Lina Select.

Installation

Steps for correctly installing and levelling the treatment table.

Rating Plate

Information about the location and importance of the rating plate.

Upholstery and Base Versions

Upholstery Options

Details on available upholstery types: standard and soft.

Base Versions

Describes the different base types: Alu, Wood, and Static.

General Operation and Features

General Operation Overview

Introduction to operating the Lina Select table.

Key Features

Overview of characteristics, actuators, and initial use.

Model View

Visual guide with numbered parts of the treatment table.

Manual Control Panel Operations

Manual Control Panels (MCPs)

General explanation of manual control panels and their functions.

Alu Design MCP Functions

Detailed operation, locking, and memory functions of the Alu Design MCP.

Wood;Static MCP Functions

Detailed operation, locking, and memory functions of the Wood/Static MCP.

Table Adjustments

Work Height Adjustment

Instructions for adjusting the table's work height.

Backrest and Seat Adjustments

How to adjust the backrest angle and seat inclination.

Leg Section and Footrest

Instructions for adjusting the leg section and footrest.

Optional Foot Control Panel

Foot Control Panel Overview

Description, connection, and capabilities of the optional foot control panel.

Foot Control Panel Operation

How to adjust actuators and manage memory positions using the foot control.

Optional Heating System

Smart Thermo 3 System

Overview of the optional heating system and its features.

Heating System Operation

Instructions for operating the heating system's control panel.

Heating Levels and Time Settings

Explanation of heating levels, power, and time settings.

Optional Vibration System

Vibro Wellness 10 System

Introduction to the optional vibration massage system.

Vibro Wellness Operation

How to start and operate the massage functions.

Massage Programs and Intensity

Details on pulse-massage, wellness-massage, and intensity settings.

Software Management

Software Initialization

Steps to re-initialize the software for position correction.

Software Reset

Procedure to reset the software to its initial status.

Cleaning and Maintenance

Upholstery Cleaning and Care

Guidelines for cleaning artificial leather and polyurethane upholstery.

Housing and Fittings Cleaning

Instructions for cleaning the table's housing and fittings.

Malfunctions and Repair

Malfunctions and Troubleshooting

Table of common malfunctions, their causes, and troubleshooting steps.

Repair and Customer Service

Contact information and conditions for customer service and repairs.

Optional Accessories

Castor Set

Information about the optional castor set with brakes.

Cleaning and Care Products

Details on leather cleaner and upholstery care products.

Widening and Neck Rest

Information on XL widening and the optional neck rest.

Protective Covers

Information on optional protective covers for the tables.

Environmental Conditions

Transport and Storage Conditions

Recommended environmental conditions for transport and storage.

Operation Conditions

Recommended environmental conditions for operating the table.

Technical Data and Compliance

General Technical Data

Key specifications like dimensions, capacities, and weight.

EC Declaration of Conformity

Declaration of compliance with EU health and safety requirements.

Document Status

Status of Edition

Information on the manual's edition and revision date.

GHARiENi Lina Select Alu Specifications