9 PRECAUTIONS
Read carefully the instructions and the risks related to the use of a steam boiler. Operators must know operating system
and clearly understand its dangers through the manual.
Main electrical supply
Prior to carrying out any inspection or work on the machine, disconnect it from the main electrical supply and make sure
that nobody can connect it again during the technical operations. All the electrical or electronic machines or basic
structures installed must be connected to the ground line.
Flammability
Adopt all the necessary precautions to avoid any direct contact with hot materials or flames. Put fire extinguishers near
the machine for an immediate intervention in the event of fire.
Pressure / Steam
Before each intervention switch off the boiler and check that residual pressures are not inside any branch of the hydraulic
circuit. They could cause steam sprays in the case of disassembling of pipes or components.
Noise
The noise emission is not excessive, because it remains under 70dB(A).
10 HAZARDOUS USE
The verification of conformity to the essential safety rules and to the dispositions enclosed in the machine directive is
carried out by filling in the checking lists arranged in advance and included in the technical file.
The checking lists are of two kinds:
List of dangers (extract from EN 1050 referring to EN 292.
Application of the essential safety characteristics (Dir. Machine – encl. 1, part 1)
The dangers described in the following items have not been completely eliminated, but they have been
considered acceptable:
During the maintenance operation there could be some sprays of steam, at low pressure, or of spotting product
(maintenance operation must be carried out using suitable protection devices).
During use it is possible to accidentally come into contact with surfaces at a temperature of over 80°C. Be
careful.
Protection against direct and indirect contacts must be adopted by the user.
11 DIMENSIONS AND TECHNICAL DRAWINGS
To Next Page
Loading...