Ghisalba VFD-E Series - Page 107

Chapter 5 Parameters
_
VFD-E Series
5-62 Revision August 2006, 01EE, SW--PW V1.03/CTL V2.03
12345 0
MI1
MI2
MI3
MI4
MI5
MI6
Weights
Bit
7891011 6
MI7
MI8
MI9
MI10
MI11
MI12
0=no use
1=Used by PLC
04.25 The Analog Input Used by PLC
Settings Read Only Factory setting: ##
Display Bit0=1: AVI used by PLC
Bit1=1: ACI/AVI2 used by PLC
 The equivalent 2-bit is used to display the status(used or not used) of each analog input. The
value for Pr.04.25 to display is the result after converting 2-bit binary into decimal value.
1 0
Weights
Bit
0=non-use
1=used by PLC
AVI
ACI/AVI2
04.26 Display the Status of Multi-function Input Terminal
Settings Read Only Factory setting: ##
Display Bit0: MI1 Status
Bit1: MI2 Status
Bit2: MI3 Status
Bit3: MI4 Status
Bit4: MI5 Status
Bit5: MI6 Status
Bit6: MI7 Status
Bit7: MI8 Status
Bit8: MI9 Status
Bit9: MI10 Status
Bit10: MI11 Status
Bit11: MI12 Status