Ghisalba VFD-E Series - Page 33

Chapter 3 Start Up
_
VFD-E Series
2-18 Revision August 2006, 01EE, SW--PW V1.03/CTL V2.03
Frame B
VFD007E11A, VFD015E21A, VFD022E21A/23A/43A, VFD037E23A/43A
ȕ
Control Terminal 1
Control Terminal 2
Control Terminal 1:
Torque: 5kgf-cm (4.4 lbf-in)
Wire Gauge: 12-24 AWG (3.3-0.2mm
2
)
Control Terminal 2:
Torque: 2kgf-cm (2 lbf-in)
Wire Gauge: 16-24 AWG (1.3-0.2mm
2
)
Power Terminal:
Torque: 18 kgf-cm (15.6 lbf-in)
Wire Gauge: 8-18 AWG (8.4-0.8mm
2
)
Wire Type: Copper only, 75
o
C
NOTE: No T/L3 terminal on 1-phase models