Ghisalba VFD-E Series - Page 86

Chapter 5 Parameters
_
VFD-E Series
Revision August 2006, 01EE, SW--PW V1.03/CTL V2.03 5-41
 You can read the master frequency command source by this parameter.
Display Value Bit Function
1 Bit0=1 Master Freq Command Source by First Freq Source (Pr.02.00).
2 Bit1=1 Master Freq Command Source by Second Freq Source (Pr.02.09).
4 Bit2=1 Master Freq Command Source by Multi-input function
8 Bit3=1
Master Freq Command Source by PLC Freq command
02.17 Display the Operation Command Source
Settings Read Only Factory setting: ##
 You can read the operation source by this parameter.
Display Value Bit Function
1 Bit0=1
Operation Command Source by Digital Keypad
2 Bit1=1 Operation Command Source by RS485 communication
4 Bit2=1 Operation Command Source by External Terminal
8 Bit3=1
Operation Command Source by Multi-input function
16 Bit4=1
Operation Command Source by PLC Operation Command