Page 18
FFXX - JUMP mode selection
Press the MENU key until FFXX is displayed. Press ENTER.
The display shows “FF01 to FF99”. Select the desired speed with the UP & DOWN keys.
Press ENTER to validate the selection,
“FF01” (slowest) and “FF99” (fastest).
CCXX - Fade mode selection
Press the MENU key until CCXX is displayed. Press ENTER.
The display shows “CC01 to CC99”. Select the desired speed with the UP & DOWN keys.
Press ENTER to validate the selection,
“CC01” (slowest) and “CC99” (fastest).
EEXX - Pluse mode selection
Press the MENU key until EEXX is displayed. Press ENTER.
The display shows “EE01 to EE99”. Select the desired speed with the UP & DOWN keys.
Press ENTER to validate the selection,
“EE01” (slowest) and “EE99” (fastest).
FXXX - Strobe mode selection
Press the MENU key until FXXX is displayed. Press ENTER.
The display shows “F001 to F255”. Select the desired speed with the UP & DOWN keys.
Press ENTER to validate the selection,
“F001” (slowest) and “F255” (fastest).
Auto - Auto mode selection (modes Jump, fade, Pulse and Strobe follow in loop)
Press the MENU key until AUTO is displayed.
Press ENTER to validate the selection,
Soud - Audio mode selection
Press the MENU key until SOUD is displayed. Press ENTER.
The display shows “VOL1” to “VOL9”. Select the desired audio sensitivity with the UP & DOWN keys.
Press ENTER to validate the selection.
Select BAON for the projectors turn in blackout (after 1 second) when there is no sound or BAOF for the
projector to go into JUMP mode (after 1 second) when there is no sound.
To Next Page
Loading...