MENU
MENU DESCRIP-
TION
SUB-MENU DESCRIPTION
Axxx Set Address A000 - A512 Setting up a starting DMX address of the xture
Auxx Static mode Au1-Au15 Fixed color selection
FFxx Jump mode FF1-FF99 From slow to fast
CCxx Fade mode CC1-CC99 From slow to fast
EExx Pulse mode EE1-EE99 From slow to fast
Fxxx Strobe mode F000-F255 From slow to fast
Auto Auto mode (Jump, Fade, Pulse and strobe modes in loop)
Soud Sound mode vol1-vol9
Sound sensitivi-
ty adjust
bAon Blackout after 1 seconde without
sound
bAof Jump mode after 1 seconde without
sound
Axxx - Setting the DMX address
Press MENU to select AXXX, press Enter to start adjustment. Use the
UP or DOWN keys to set the desired address. Then press ENTER to conrm.
Auxx Selection of STATIC mode
Press the MENU button until AUXX is displayed. Press ENTER.
The display shows “AU01 to AU15”. Select the desired color (with the UP & DOWN keys.
Press ENTER to validate the selection,
Even after switching off and on again, the projector returns to its last validated state.
To Next Page
Loading...
Need help?
General