INTRODUCTION
This booklet describes the operating procedures for ECOJET C.E. – ECOINOX C.E. - JET C.E.
series pressure water system with electronic control. These pumps are usually used for marine
applications to pump fresh water and liquids without any suspended parts. Most common uses are
for sanitary systems, water supply, for water pressure system, deck and chain washing, fire fighting
Standard construction is with bronze body but cast iron body is available on request (ECOJET G-
JET G model ).
In particular the models ECOJET B (bronze), ECOINOX (inox), ECOJET G and JET G (cast iron)
have to work with fresh water, and the models ECOJET BB (bronze-bronze), JET B (bronze) are
fitted either for fresh or sea water. The use of these machines must be made by qualified and
experienced personnel, with complete knowledge of local legislation.
These instruction should be carefully read before installation of any ECOJET series
pump. The manufacturer declines all responsibility in case of accident or damage due to
negligence or lack of observance of instructions given in this booklet, or application in
conditions not conforming to detail on the motor plate. All responsibility is also declined
for damage caused by improper use of the pump.
CONTROL PRESS
To Next Page
Loading...
