EasyManua.ls Logo

Gianni Ferrari TG200 - User Manual

Gianni Ferrari TG200
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MANUALE TECNICO
NOTICE TECNIQUE
TECHNICAL HANDBOOK
TECHNISCHES HANDBUCH

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Gianni Ferrari TG200 and is the answer not in the manual?

Summary

Welcome and Safety Information

Customer Welcome Message

A message welcoming customers to the brand and emphasizing the importance of the manual.

Safety Symbol Explanation

Explains the meaning and importance of safety symbols used throughout the manual.

Operator Responsibilities

General Operator Duties

Outlines the operator's responsibility to read the manual, maintain the machine, and use it safely.

Prohibitions and Recommendations

Details restrictions on child use, unauthorized modifications, and emphasizes using genuine parts.

General Safety Precautions

User Safety Practices

Emphasizes careful operation, regular checks, and avoiding accidents through adherence to instructions.

Machine Inspection and Condition

Stresses the importance of inspecting the machine for defects before use and operating only in perfect condition.

Safe Operating Environment

Covers keeping people and objects at a safe distance and using only original parts.

Safe Operation Practices

Handling Objects and Slopes

Advises on stopping the machine upon impact, checking for damage, and safe operation on slopes.

Slope Control and Hazard Avoidance

Mowing Safety and Hazard Avoidance

Recommends wearing protective footwear and clothing, inspecting the area, and stopping blades before crossing non-grassy surfaces.

Transport and Unloading Safety

Slope Limitations for Operation

Specifies that the machine should not be used on slopes exceeding 15 degrees.

Safe Slope Maneuvering

Advises against sudden stops/starts on slopes and maintaining low speed on inclines and curves.

Awareness of Hidden Dangers

Warns operators to pay attention to humps, potholes, and other hidden hazards on the ground.

Technical Specifications

Engine and Mower Specifications

Details engine brand, power, displacement, mower deck specs, cutting width, and collector capacity.

Noise and Vibration Levels

Provides guaranteed noise level and exposure levels for upper limbs and body vibration.

Controls and Instruments Overview

Operator Controls Identification

Identifies and labels key controls such as pedals, levers, steering wheel, and switches.

Indicator Lights and Gauges

Details the function of warning lights, headlights, and the hour-meter for monitoring machine status.

Transmission and Throttle Controls

Transmission Operation

Illustrates the forward, stop, and reverse operation of the transmission via pedals.

Throttle and Starter Operation

Explains how to adjust the throttle for engine speed and use the starter for engine engagement.

Levers and Power Take-Off (PTO)

Lever Functions

Demonstrates the operation of various levers for machine functions like lifting and tilting.

PTO Engagement

Shows how to engage and disengage the Power Take-Off (PTO) for operating attachments.

Braking System Operation

Brake Engagement and Disengagement

Illustrates how to apply and release the parking brake and service brakes.

Brake Warning Indicators

Shows what indicators or sounds mean if the brakes are applied incorrectly or if there is an issue.

Engine Starting and Bypass

Bypass Mechanism

Explains the function and operation of the bypass mechanism, likely related to the transmission or mower deck.

Engine Start Procedure

Details the steps required to safely start the engine, including safety checks and key operation.

Driving and Engine Operation

Engine Start Sequence

Provides a step-by-step guide for starting the engine, including seat, brake, choke, and ignition key usage.

Machine Movement Controls

Explains how to adjust throttle, select speed using pedals, and steer the machine with the steering wheel.

Mower Deck and Grass Collection

Mower Deck Overview

Shows the mower deck with capacity information and dimensions.

Automatic Grass Collection

Illustrates the operation of the automatic grass collection system, including indicators and controls.

Electrical Wiring Diagram

Component Identification

Labels various electrical components and their connections within the diagram.

Wiring Diagram Legend and Components

Component Descriptions

Lists and describes the function of numbered electrical components used in the wiring diagram.

Color Code Chart

Provides a key to the color codes used for wires in the electrical diagram.

Cutting Height Adjustment and PTO Engagement

Adjusting Cutting Height

Details the procedure for adjusting the mower deck's cutting height after removing the ignition key.

PTO Engagement Procedure

Illustrates the steps for engaging and disengaging the PTO, showing the 'ON' and 'OFF' states.

Practical Operation Tips

Pre-Operation Checks

Advises on actions to take before leaving the driver's seat, such as disengaging PTO and applying the brake.

Troubleshooting Vibrations

Recommends addressing abnormal machine vibrations immediately and checking for damage.

Transport Safety

Stresses disengaging the transmission when the machine is transported or not in use.

Maintenance and Safety Tips

Workplace Safety Compliance

Emphasizes adherence to work safety regulations and proper handling of the machine.

Machine Cleaning and Operation

Provides guidance on cleaning the machine, checking tire pressure, and safe operation practices.

Dismounting the Mower Deck

Step-by-Step Disassembly

Illustrates the process of removing the mower deck, showing key steps and connections.

Assembling the Mower Deck

Step-by-Step Assembly

Demonstrates the procedure for reattaching the mower deck, including aligning and securing components.

Fueling Procedures and Safety

Safe Fueling Location

Specifies that fueling must be done in open or well-ventilated areas with the engine off and no sparks.

Fuel Handling Precautions

Warns about gasoline's flammability, advises on storage, and prohibits fueling while the engine is hot or running.

Storage with Fuel

Prohibits storing the machine with fuel in an indoor building due to fire risk and advises to let the engine cool down.

Checks and Maintenance

Fire Hazard Reduction

Advises keeping the engine, muffler, battery, and fuel area free from debris to prevent fires.

Parking and Storage Safety

Recommends lowering cutting parts when parking or storing the machine unless a mechanical lock is used.

Oil Filling Procedure

Engine Oil Filling

Illustrates the steps for adding engine oil using the dipstick and funnel, specifying the oil type.

Oil Drain and Refill

Shows the process of draining old oil and refilling with new oil, likely for an oil change.

Oil Level Check and Lubricant Types

Checking Engine Oil Level

Demonstrates how to check the engine oil level using the dipstick, indicating MAX and MIN marks.

Hydraulic System Oil

Shows the oil type for the hydraulic system and its components.

Routine Maintenance Tasks

Air Filter Maintenance

Shows how to clean or replace the air filter, including cleaning methods.

Tire Pressure Checks

Indicates the recommended tire pressures for different parts of the machine.

Battery Maintenance

Illustrates how to check the battery status and connections.

Main Maintenance Operations Schedule

Preventive Maintenance Tasks

Lists principal maintenance operations and their recommended frequencies based on operating hours.

Maintenance Task Descriptions

Provides English descriptions for various maintenance tasks like belt check, cleaning, and oil changes.

Maintenance Frequency Guidelines

Adjusting Maintenance Intervals

Explains how heavy working conditions may require more frequent maintenance.

Cleaning Operation Methods

Recommends using compressed air for cleaning operations and avoiding water.

Elevator Operation

Elevator Raising and Dumping

Illustrates the operation of the elevator mechanism for lifting and dumping the grass collector.

Blade Replacement and Maintenance

Blade Removal Procedure

Details the steps for safely removing the mower blades, emphasizing safety precautions.

Blade Installation and Safety

Shows how to install new blades and stresses the importance of using genuine parts and tightening screws securely.

Safety Stickers and Warnings

Location of Safety Labels

Identifies the location of various safety stickers on the machine, numbered for reference.

Understanding Safety Icons

Explains the meaning of common safety icons related to operation, hazards, and maintenance.

General Notes and Support

Technical Support Contact

Instructs users to contact an authorized service center for technical interventions not covered in the manual.

Manual Preservation and Copyright

Advises keeping the manual in good condition and prohibits reproduction or translation without written authorization.

Optional Equipment

Clawed Wheels

Shows optional clawed wheels and their recommended tire pressure.

Mulching Kits

Depicts optional mulching kits for the mower deck.

Gianni Ferrari TG200 Specifications

General IconGeneral
BrandGianni Ferrari
ModelTG200
CategoryLawn Mower
LanguageEnglish

Related product manuals