Need help?Do you have a question about the Gianni Ferrari Turbo 2 and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Engine Type | Diesel |
| Cutting Units | 3 |
| Max Speed | 12 km/h |
| Collection System | Direct collection |
Details about the CE mark and the machine's serial number for identification.
Comprehensive guidelines for safe operation, including pre-operation checks and personnel safety.
Details on the machine's transmission system and front/rear axles.
Information on steering, controls, and the Power Take-Off (PTO) system.
Overview of the electrical system, available options, and accessories for the machine.
Actions for emergency conditions and basic operational controls.
Explanation of the indicators and functions on the central control panel.
Details on the side control panel and the transmission selector modes for Turbo 4.
Information on the speed selector for Turbo 2 and adjustments for seat and steering column.
Step-by-step guide for starting the engine on different Turbo models.
Instructions for starting the machine, engaging the PTO, and safety mechanisms.
How to use the differential lock and move the machine with the engine off.
How to operate the front attachment lift and its floating function.
Steps for engaging PTO, cutting grass, and collecting it, including full container warnings.
Procedures for dumping grass and operating safety features of the grasscatcher.
Instructions for unloading grass using the elevator and for direct discharge.
Procedure for opening the bodywork and safety precautions for inspections.
Maintenance tasks for the elevator, grasscatcher, engine, and radiator.
Cleaning procedures for radiator and air cleaner, and points for greasing the machine.
Lubrication of transmission units, checking belts, and PTO safety lock.
How to check the oil level in hydrostatic transmissions.
Information on hydraulic filters, pedal adjustments, and hoses.
How to check, adjust, and maintain the parking brake system.
Tyre pressure checks, intake turbine function, and general cleaning advice.
Step-by-step instructions for assembling the mower deck.
Steps for replacing or sharpening mower deck blades, including safety warnings.
Guidelines for sharpening blades and required tightening values for nuts.
Description of the hydraulic lift system and its operation.
Maintenance requirements and procedure for cleaning the unidirectional valve.
Details on the hydraulic collector elevator, its use, and maintenance.
Identification of various safety labels present on the machine.
Detailed explanations for each safety label displayed on the machine.
To Next Page
