- Pag. 2. -
Contents:
1. Warnings 3
2. Mounting the brake system on the bicycle 4
2.1 Assembly of rotor 4
2.2 Assembly of brake lever 5
2.3 Assembly of hose 6
2.4 Assembly of caliper “Post Mount” (Manitou forks) 7
2.5 Assembly of caliper “International Standard” 8
3. Adjustment 9
3.1 Pad clearance adjustment 9
3.2 Lever reach adjustment 10
3.3 Angle of the brake fluid reservoir 10
4. Tightening torque 11
5. Maintenance 12
5.1 General 12
5.2 Replacement of brake pads 14
5.3 Bleeding procedure 15
6. Trouble shooting and -prevention 20
To Next Page
Loading...