- Pag. 1. -
XtC
Model Year 2001
Owners Manual
October 2000.
Contents:
1. Sizing.
2. Rear suspension
2-1. NRS
TM
rear suspension system
2-2. Selecting rear travel
(only XtC Team, XtC Mt. Snow and XtC Big Bear).
2-3. Selecting air pressure, “Zero-SAG” adjustment
2-4. Rear suspension tuning
2-5. Rebound damping adjustment
(only XtC Team, XtC Mt. Snow and XtC Big Bear)
2-6. Removing the rear shock assembly or pivots
2-7. Air pressure adjustment range.
3. Cleaning and maintenance.
PROFESSIONAL CROSS COUNTRY BIKE
• Unique 4 bar linkage design.
• NRS
TM
(No Resonance System) suspension with “no-SAG” set-up.
• Sealed bearings on main pivots:
BB shell - chain stays / Linkage plates - seat tube / Seat stays - linkage plates.
• Rising suspension + “no-SAG” result in “no bobbing” and “no power loss”.
• Sensitive rear shock works even on the smallest bumps.
• Lightest Full Suspension competition XC team bike.
• 2 rear shock positions (XtC Team, XtC Mt. Snow and XtC Big Bear only).
• Rear wheel travel: 3~3¾ inches (XtC Team, XtC Mt. Snow and XtC Big Bear only)
3¾ inches (XtC Mammoth and XtC Napa).
• Front wheel travel: 3 inches.
To Next Page
Need help?
General
